1. Introduction and Installation
8
Finding t he Controls
1.3 Overview
Note:
L Remove all the blue shipping tapes before
installation.
1.4 Description of buttons
L Keep the front cover page open for button
locations.
A {BROADCAST}
L To transmit a document to multiple parties
(page 26).
B {CALLER ID}
L To use Caller ID service (page 20, 22).
C {AUTO ANSWER}
L To turn ON/OFF the auto answer setting
(page 27).
D {TONE}
L To change from pulse to tone temporarily
during dialling when your line has rotary
pulse services.
E {COPY}
L To initiate copying (page 32).
F {FAX/START}{SET}
L To initiate fax transmission or reception.
L To store a setting during programming.
G {STOP}
L To stop an operation or programming.
H {HELP}
L To print a quick reference (page 13).
I {NAVIGATOR}{VOLUME}
L To adjust volume (page 14).
L To search for a stored item (page 19, 25).
L To select features or feature settings
during programming (page 34).
L To navigate to the next operation.
J {MENU}
L To initiate or exit programming.
K {MONITOR}
L To initiate dialling without lifting the
handset.
L {FLASH}
L To access special telephone services
such as call waiting or for transferring
extension calls.
M {REDIAL}{PAUSE}
L To redial the last number dialled. If the line
is busy when you make a phone call using
the {MONITOR} button, the unit will
automatically redial the number up to 9
times.
L To insert a pause during dialling.
N {MUTE}
L To mute your voice to the other party
during a conversation. Press this button
again to resume the conversation.
1 Speaker
2 Document guides
3 Paper tray
4 Recording paper support
5 Recording paper entrance
6 Recording paper exit
7 Tension plate
8 Front cover
9 Document exit
j Document entrance
k Green button (Back cover release button)
l Back cover
98klj
1543762
FP143HK_en.book Page 8 Friday, December 19, 2003 11:57 AM
