7. Programmable Features
38
7.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 35 to
page 37.
1 Press {MENU}.
2 Press {#} and the 2-digit code number.
3 Press the desired direct command, using the
dial keypad, to display the desired setting.
L This step may be slightly different
depending on the feature.
4 Press {SET}.
5 To exit programming, press {MENU}.
7.4.1 Program code and direct
command button
{#}{0}{1} Date and time
L Enter the date and time using the dial keypad
(see page 14 for details).
{#}{0}{2} Your logo
L Enter your logo using the dial keypad (see
page 15 for details).
{#}{0}{3} Your fax number
L Enter your fax number using the dial keypad
(see page 17 for details).
{#}{0}{4} Sending report
– {1}: “ON”
– {2}: “OFF”
– {3}: “ERROR” (default)
{#}{0}{6} FAX ring count
– {1}: “1”
– {2}: “2” (default)
– {3}: “3”
– {4}: “4”
– {5}: “5”
– {6}: “6”
– {7}: “7”
– {8}: “8”
– {9}: “9”
{#}{1}{3} Dialling mode
– {1}: “PULSE”
– {2}: “TONE” (default)
{#}{1}{7} Ringer pattern
– {1}: “A” (default)
– {2}: “B”
– {3}: “C”
{#}{2}{2} Journal report
– {1}: “ON” (default)
– {2}: “OFF”
{#}{2}{3} Overseas mode
– {1}: “NEXT FAX”
– {2}: “OFF”
– {3}: “ERROR” (default)
{#}{2}{5} Delayed transmission
– {1}: “ON”
– {2}: “OFF” (default)
L If you select “ON”, then enter the fax number
and transmission time using the dial keypad
(see feature #25 on page 35 for details).
{#}{2}{6} Caller ID list
– {1}: “ON”
– {2}: “OFF” (default)
{#}{2}{7} Black list
– {1}: “ON”
– {2}: “OFF” (default)
{#}{3}{1} Distinctive ring
– {1}: “ON”
– {2}: “OFF” (default)
{#}{3}{4} Quick scan
– {1}: “ON”
– {2}: “OFF” (default)
{#}{3}{6} Receiving reduction
– {1}: “92%” (default)
– {2}: “86%”
– {3}: “72%”
– {4}: “100%”
{#}{3}{9} Display contrast
– {1}: “NORMAL” (default)
– {2}: “DARKER”
{#}{4}{1} Fax activation code
– {1}: “ON” (default)
– {2}: “OFF”
L If you select “ON”, enter your code from 2 to 4
digits using 0–9, {*} and {#}.
{#}{4}{4} Memory reception alert
– {1}: “ON” (default)
– {2}: “OFF”
FP143HK_en.book Page 38 Friday, December 19, 2003 11:57 AM
