Hardware Installation SY-P4I875P DRAGON 2 V1.0
14
Chapter 2
HARDWARE INSTALLATION
Congratulations on your purchase of SY-P4I875P DRAGON 2 V1.0
Motherboard. You are about to install and connect your new Motherboard.
Note: Do not unpack the Motherboard from its protective
anti-static packaging until you have made the following
preparations.
2-1 PREPARATIONS
Gather and prepare all the following hardware equipment to complete the
installation successfully:
1. Socket mPGA478 processor with CPU cooling fan. (CPUs with a
VCORE higher than 1.6 volts are not supported)
2. DDR memory module(s)
3. A computer case with an adequate power supply unit (350W for a
minimally loaded system or 400W for a fully loaded system).
4. Monitor
5. Keyboard
6. Pointing Device (mouse)
7. Disk Drives: HDD, CD-ROM, Floppy drive…
8. External Peripherals: Printer and Modem (optional)
9. VGA Card (AGP or PCI)
Note: This M/B only supports 1.5V AGP VGA cards! 3.3V AGP cards
are not supported !
