Hardware Installation SY-P4I875P DRAGON 2 V1.0
45
Step 1. Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
“Auto”.
Step 2. Select [LOAD OPTIMIZED DEFAULTS]
Select the “LOAD OPTIMIZED DEFAULTS” menu and type “Y” at the
prompt to load the BIOS optimal setup.
Step 3. Select [SOYO COMBO FEATURE]
Set the [CPU Frequency Select] field to “Manual”, to be able to change the
CPU frequency 1 MHz stepping.
Step 4. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and
continue the boot sequence.
You are now ready to configure your system with the BIOS setup program.
Go to Chapter 3: BIOS SETUP
