TL-WR542G 54M Wireless Router User Guide
- 29 -
any combination of hexadecimal digits (0-9, a-f, A-F) in specified length. For
example: 2F34D20BE2.
5. Status - Select Enabled or Disabled for this entry on the Status pull-down list.
6. Click the Save button to save this entry.
To add additional entries, repeat steps 1-6.
Note: When 64-bit, or 128-bit, or 152-bit is selected, WEP Key will be enabled.
To modify or delete a exist entry:
1. Click the Edit or Delete button in the Modify column in the MAC Address
Filtering Table.
2. Enter the value as desired in the Add or Modify Wireless MAC Address
Filtering entry page, and click the Save button.
You can click the Enable All button to make all the entries effective, click the Disable All
button to make all the entries ineffective, click the Delete All button to delete all the
entries.
Click the Next button to go to the next page and click the Previous button to return to the
previous page.
For example: If you desire that the wireless station A with MAC address
00-0A-EB-00-07-BE can access the Router, the wireless station B with MAC address
00-0A-EB-00-07-5F cannot access the Router, and the wireless station C with MAC
address 00-0A-EB-00-07-8A can access the Router when its WEP key is
2F34D20BE2E54B326C5476586A, while all other wireless stations cannot access the
Router, you should configure the Wireless MAC Address Filtering list following these
steps:
1. Click the Enable button to enable this function.
2. Select the radio button Deny the stations not specified by any enabled entries in
the list to access for Filtering Rules.
3. Delete all or disable all entries if there exist any entries already.
4. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-BE in the
MAC Address field, enter wireless station A in the Description field, select Allow in
the Privilege pull-down list and select Enabled in the Status pull-down list. Click the
Save and the Return button.
5. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-5F in the
MAC Address field, enter wireless station B in the Description field, select Deny in
the Privilege pull-down list and select Enabled in the Status pull-down list. Click the
Save and the Return button.
6. Click the Add New... button and enter the MAC address 00-0A-EB-00-07- 8A in
the MAC Address field, enter wireless station C in the Description field, select
128-bit in the Privilege pull-down list, enter 2F34D20BE2E54B326C5476586A in
the WEP Key field and select Enabled in the Status pull-down list. Click the Save
and the Return button.
7. If you select the radio button Allow the stations not specified by any enabled
entries in the list to access for Filtering Rules, the wireless station B still cannot
