TL-WR542G 54M Wireless Router User Guide
- 47 -
Figure 5-32: Advanced Security settings
Packets Statistic interval (5 ~ 60) - The default value is 10. Select a value
between 5 and 60 seconds in the pull-down list. The Packets Statistic interval
value indicates the time section of the packets statistic. The result of the statistic
used for analysis by SYN Flood, UDP Flood and ICMP-Flood.
DoS protection – Enable or Disable the DoS protection function. Only when it is
enabled, will the flood filters be effective.
Enable ICMP-FLOOD Attack Filtering – Enable or Disable the ICMP-FLOOD
Attack Filtering.
ICMP-FLOOD Packets threshold: (5 ~ 3600) – The default value is 50. Enter a
value between 5 ~ 3600 packets. When the current ICMP-FLOOD Packets
numbers is beyond the set value, the Router will start up the thwarting function
immediately.
Enable UDP-FLOOD Filtering – Enable or Disable the UDP-FLOOD Filtering.
UDP-FLOOD Packets threshold: (5 ~ 3600) – The default value is 50. Enter a
value between 5 ~ 3600 packets. When the current UPD-FLOOD Packets numbers
is beyond the set value, the Router will start up the thwarting function immediately.
Enable TCP-SYN-FLOOD Attack Filtering – Enable or Disable the
TCP-SYN-FLOOD Attack Filtering.
TCP-SYN-FLOOD Packets threshold: (5 ~ 3600) – The default value is 50. Enter
a value between 5 ~ 3600 packets. When the current TCP-SYN-FLOOD Packets
numbers is beyond the set value, the Router will start up the thwarting function
immediately.
