A SERVICE OF

logo

TL-WR542G 54M Wireless Router User Guide
- 40 -
Figure 5-24: Firewall Settings
Enable Firewall – the general firewall switch is on or off.
Enable IP Address Filtering – set IP Address Filtering is enabled or disabled.
There are two default filtering rules of IP Address Filtering, either Permit or Prevent
accessing the Router.
Enable Domain Filtering – set Domain Filtering is enabled or disabled.
Enable MAC Filtering – set MAC Address Filtering is enabled or disabled. You can
select the default filtering rules of MAC Address Filtering, either Permit or Prevent
accessing the Router.
5.8.2 IP Address Filtering
The IP address Filtering feature allows you to control Internet Access by specific users
on your LAN based on their IP Addresses. The IP address Filtering are set on this page,
figure 5-25: