TL-WR542G 54M Wireless Router User Guide
- 59 -
Figure A-3: Remote Management
Note: Type http://192.168.1.1:88
into browser to log into the Router if the above
configuration takes effect.
3) Log into the Router, click the “Forwarding” menu on the left of your browser, and
click " Virtual Servers" submenu. On the "Virtual Server" page, enter “80” into
the blank below the “Service Port”, and your IP address below the IP Address,
assuming 192.168.1.188 for an example, remember to “Enable” and “Save”.
Figure A-4: Virtual Server
5. The wireless stations cannot connect to the Router.
1) Make sure the "Wireless Router Radio" is enabled.
2) Make sure that the wireless stations' SSID accord with the Router's SSID.
3) Make sure the wireless stations have right KEY for encryption when the Router
is encrypted.
4) If wireless connection is ready, but you can’t access the Router, check the IP
Address of your wireless stations.
