TL-WR542G 54M Wireless Router User Guide
- 58 -
Figure A-1: Virtual Server
Note: Your opposite side should call your WAN IP, which is displayed on the
“Status” page.
4) How to enable DMZ Host: Log into the Router, click the “Forwarding” menu on
the left of your browser, and click " DMZ" submenu. On the "DMZ" page, click
“Enable” radio and type your IP address into the “DMZ Host IP Address” field,
assuming 192.168.1.169 as an example, remember to click "Save” button.
Figure A-2: DMZ
4. I want to construct a WEB Sever on the LAN, what should I do?
1) Because the WEB Server port 80 will interfere with the WEB management port
80 on the Router, you must change the WEB management port number to avoid
interference.
2) To change the WEB management port number: Log into the Router, click the
“Security” menu on the left of your browser, and click "Remote Management"
submenu. On the "Remote Management" page, type a port number except 80,
such as 88, into the "Web Management Port" field. Click “Save” and reboot the
Router.
