9
EElleeccttrroonniicc TTeemmppeerraattuurree SSeettttiinnggss
The electronic controls are located behind the refrigerator door above
the refrigerator section. Press
Display On
pad to activate control
panel. All other pads except for
Alarm Off
pad, remain inactive until
Display On
pad is pressed. Once activated, pads remain
programmable for at least 10 minutes.
Refrigerator and freezer controls are preset at the mid setting, (5 bars
are displayed). Wait 24 hours after connecting power for refrigerator
and freezer sections to reach this setting. After 24 hours, adjust
controls as desired. 1 bar displayed is the warmest setting and 9 bars
displayed is coldest setting.
•To adjust refrigerator or freezer temperature, press
Display On
pad
then
Ref Temp
pad or
Freezer Temp
pad. Press
Higher Temp
pad
or
Lower Temp
pad to adjust temperature setting 1 level at a time.
Holding down
Higher Temp
pad or
Lower Temp
pad adjusts
temperature more than 1 level at a time
EEnnttrryy TToonnee
Entry tone is the “beep” heard when a pad is pressed and command is
read and accepted.
•Deactivate entry tone by pressing and holding
Display On
pad for
3 to 5 seconds. Three short beeps indicate instructions were
accepted.
•Activate entry tone by pressing and holding
Display On
pad for 3
to 5 seconds.
MMaaxx RReeffrriiggeerraattoorr MMooddee
Max refrigerator mode adjusts refrigerator temperature to the coldest
setting for 10 hours. Then the refrigerator temperatures automatically
return to previous setting.
•Activate max refrigerator mode by pressing
Display On
pad then
Max Ref
pad. Indicator light will glow.
•Deactivate max refrigerator mode before automatic reset by
pressing
Display On
pad then the
Max Ref
pad.
8
BBeeffoorree UUssiinngg YYoouurr RReeffrriiggeerraattoorr
To obtain the best possible results from your refrigerator, it is important
that you operate it properly. This section tells you how to set the
temperature controls, how to operate the features in your refrigerator,
and how to save energy.
UUssiinngg tthhee ppoowweerr oonn//ooffff sswwiittcchh ((ppoowweerr iinntteerrrruupptteerr sswwiittcchh))
The power on/off switch is located behind the top grille. It is used to
turn the power to the refrigerator off when cleaning it or changing the
light bulbs. The refrigerator is shipped with the power interrupter
switch on.
To turn power off:
1. Remove center grille blade.
2. Press power on/off switch to the OFF position.
To turn power on:
1. Press power on/off switch to the ON position.
2. Replace center grille blade.
IIMMPPOORRTTAANNTT::
Be sure the power on/off switch is in the ON position
after cleaning the refrigerator or changing light bulbs.
UUssiinngg tthhee sshhoowwrroooomm sswwiittcchh
The showroom switch allows electronic controls and interior lights to
function independently of refrigeration system. Showroom switch is
located behind the top grille to the right of the control panel. The
refrigerator is shipped with the showroom switch in the run position.
Showroom switch
on - full cooling
power to
refrigerator.
Showroom switch
off - no cooling in
refrigerator (power
only to lights and
electronic controls).
Showroom
switch
Power
switch
