56
SYSTEM OPTIONS
Example 2:
To clear a jack assignment.
1) Select Input Select, then select the input source (DVD,
etc.).
2) Select I/O Assignment, then select the jack assignment
(Optical Output, Optical Input, Coaxial Input or
Component Video).
3) Select NONE, then press ENTER to clear the
assignment.
y
This menu item is also available in the front panel display system
options menu (see page 89).
• You cannot select a specific item more than once for the same
type of jack.
• When you connect a component to both the COAXIAL and
OPTICAL jacks, priority is given to signals input at the
COAXIAL jack.
■ Audio Select (Audio selection)
This unit comes with a variety of input jacks. You can
select the type of input signal you want to use.
Input Select > input source (DVD, etc.) > Audio Select >
Choices: Auto, i.LINK, HDMI, Coax/Opt, Analog
• Select “Auto” if you want signals to be input to this
unit in the following order: i.LINK signals,
HDMI
signals, digital signals
*
and analog signals.
• Select “i.LINK” if you only want i.LINK signals to be
input to this unit. If no i.LINK signals are input, no
sound is output.
• Select “HDMI” if you only want HDMI signals to be
input to this unit. If no HDMI signals are input, no
sound is output.
• Select “Coax/Opt” if you want digital signals to be
input to this unit at the OPTICAL or COAXIAL jacks.
Use if i.LINK or HDMI signals are also being input.
• Select “Analog” if you only want analog signals to be
input to this unit. If no analog signals are input, no
sound is output.
*
If this unit detects a Dolby Digital or DTS signal, the
decoder automatically switches to the appropriate sound
field program.
y
• You can adjust the default input mode this unit selects when the
power is turned on (see page 68).
• DTS mode is recommended for playback of a CD or LD
encoded in DTS.
If the digital output data of the player has been processed in any
way, you may not be able to perform DTS decoding even if you
make a digital connection between this unit and the player.
■ Decoder Mode (Decoder mode)
Use this feature to switch the input mode. You can
designate the reassigned digital input jacks (see page 55)
for specific audio signals (DTS, etc.).
Input Select > input source (DVD, etc.) >
Decoder Mode >
Choices: Auto, DTS
• Select “Auto” if you want this unit to automatically
detect input signal types and select the appropriate
input mode.
• Select “DTS” if you want this unit to select DTS as the
input mode.
y
This menu item is also available in the front panel display system
options menu (see page 89).
■ Volume Trim (Volume trimming)
You can adjust the level of the signal input at each jack.
This is useful if you want to balance the level of each
input source to avoid sudden changes in volume when
switching between input sources.
Manual Setup > Input Select > input source (DVD, etc.) >
Volume Trim >
Control range: –6.0 dB to +6.0 dB
y
This menu item is also available in the front panel display system
options menu (see page 89).
You can only adjust the volume for the current input source using
this setting.
Notes
Optical Input
Coaxial Input
Optical Output
I/O Assignment
Audio Select
Decoder Mode
i.LINK
HDMI
Auto
Audio Select
Decoder Mode
Volume Trim
I/O Assignment
Note
Note
DTS
Auto
Decoder Mode
Volume Trim
Rename
Audio Select
I/O Assignment
Volume Trim
Rename
Decoder Mode
Audio Select
0.0dB
