Chapter 40 Product Specifications
GS2200-24 User’s Guide
334
LEDs Per switch: PWR, SYS, ALM
GS2200-24: Per GE Ethernet RJ-45 100/1000 port: LNK/ACT, FDX
GS2200-24P: Per GE PoE Ethernet RJ-45 100/1000 port: LNK/
ACT, PoE
Per mini-GBIC slot: LNK, ACT
Per 1000BASE-T RJ-45 port (in dual personality interface): LNK/
ACT, FDX
Operating
Environment
Temperature: 0º C ~ 50º C (32º F ~ 122º F)
Humidity: 10 ~ 95% (non-condensing)
Storage Environment Temperature: -40º C ~ 70º C (-40º F ~ 158º F)
Humidity: 10 ~ 95% (non-condensing)
Fuse Specification 250 VAC, T2A
Console port D-Sub 9 pin Female (DCE)
Capacity 56 Gbps
Forwarding Rate 41.7 million packets per second
Table 113 Firmware Specifications
FEATURE DESCRIPTION
Default IP Address 192.168.1.1
Default Subnet Mask 255.255.255.0 (24 bits)
Administrator User
Name
admin
Default Password 1234
Number of Login
Accounts Configurable
on the Switch
4 management accounts configured on the Switch.
Authentication via RADIUS and TACACS+ also available.
Maximum Frame Size 9 K (9216 bytes)
VLAN A VLAN (Virtual Local Area Network) allows a physical network
to be partitioned into multiple logical networks. Devices on a
logical network belong to one group. A device can belong to
more than one group. With VLAN, a device cannot directly talk
to or hear from devices that are not in the same group(s); the
traffic must first go through a router.
MAC Address Filter Filter traffic based on the source and/or destination MAC
address and VLAN group (ID).
DHCP (Dynamic Host
Configuration Protocol)
Relay
Use this feature to have the Switch forward DHCP requests to
DHCP servers on your network.
IGMP Snooping The Switch supports IGMP snooping, enabling group multicast
traffic to be only forwarded to ports that are members of that
group; thus allowing you to significantly reduce multicast traffic
passing through your Switch.
Table 112 Hardware Specifications
