Chapter 40 Product Specifications
GS2200-24 User’s Guide
336
Port Cloning Use the port cloning feature to copy the settings you configure
on one port to another port or ports.
Syslog The Switch can generate syslog messages and send it to a
syslog server.
Firmware Upgrade Download new firmware (when available) from the ZyXEL web
site and use the web configurator, CLI or an FTP/TFTP tool to
put it on the Switch.
Note: Only upload firmware for your specific model!
Configuration Backup &
Restoration
Make a copy of the Switch’s configuration and put it back on
the Switch later if you decide you want to revert back to an
earlier configuration.
Cluster Management Cluster management (also known as iStacking) allows you to
manage switches through one switch, called the cluster
manager. The switches must be directly connected and be in
the same VLAN group so as to be able to communicate with
one another.
Table 114 Feature Specifications
L2 Bridging 16K MAC addresses (4-way associative hashed)
Static MAC address filtering by source/destination
Broadcast storm control in 1 second interval, 1 pps stepping
Static MAC address forwarding (port lock)
Switching Switching fabric: 56 Gbps, non-blocking
Max. Frame size: 9 K bytes
Forwarding frame: IEEE 802.3, IEEE 802.1q, Ethernet II, PPPoE
Prevent the forwarding of corrupted packets
14880 pps at 10 Mbps/ 148809 pps at 100 Mbps / 1488095 pps at 1
Gbps with 64 bytes packets
STP IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
Multiple Rapid Spanning Tree capability
IEEE 802.1s Multiple Spanning Tree Protocol
Table 113 Firmware Specifications
FEATURE DESCRIPTION
