Chapter 8 Basic Setting
GS2200-24 User’s Guide
76
8.3 General Setup
Use this screen to configure general settings such as the system name and time.
Click Basic Setting > General Setup in the navigation panel to display the
screen as shown.
Figure 40 Basic Setting > General Setup
The following table describes the labels in this screen.
Threshold This field displays the percentage tolerance of the voltage with which the
Switch still works.
Status Normal indicates that the voltage is within an acceptable operating range
at this point; otherwise Error is displayed.
Table 9 Basic Setting > System Info (continued)
LABEL DESCRIPTION
Table 10 Basic Setting > General Setup
LABEL DESCRIPTION
System Name Choose a descriptive name for identification purposes. This name
consists of up to 64 printable characters; spaces are allowed.
Location Enter the geographic location of your Switch. You can use up to 32
printable ASCII characters; spaces are allowed.
Contact
Person's Name
Enter the name of the person in charge of this Switch. You can use up to
32 printable ASCII characters; spaces are allowed.
