Kyocera E1000 Cell Phone User Manual


 
24 Take a picture
7CAMERA
Your phone comes with a camera. Before using
your phone’s camera, here are some tips:
You cannot activate the camera while on an
active call or while browsing files in the
media gallery.
Once the camera is active, the home screen
acts as the viewfinder.
If you get a “Low memory” error, check your
resolution and quality compression settings.
See “Camera mode options” on this page.
If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
Menu settings and options can only be
accessed when the camera is active.
Take a picture
To take a picture:
1. Activate the camera one of the
following ways:
Press the
Camera key until the camera
view screen displays.
Select
Menu > Camera.
2. Focus on the image using the phone’s display
as a viewfinder. Scroll up or down to zoom in
and out.
3. Take a picture one of the following ways:
Press the
OK key.
Press the
Camera key.
Select
Capture.
The picture is saved to your Camera Pictures.
4. Select
Send to create a multimedia
message or
Erase to delete the picture
from your phone.
5. Press the
End key to exit camera mode.
Camera mode options
You can set up how your camera takes pictures.
While in camera mode, select Options and one of
the following:
Settings displays the following settings you
may set up prior to taking a picture:
Flash sets the flash. Options are On, Off,
or
Automatic.
Resolution sets the resolution.
Low Light Mode brightens the picture for
low light environments.
Self Timer sets a self timer. Options are
Off (default) or 3, 5, or 10 second pauses.
When set, the camera beeps from 3
seconds down to the time the shutter
snaps the picture automatically. Self
Timer is not available when Multishot
mode is activated.
82-G1877-1EN.book Page 24 Thursday, August 23, 2007 10:53 AM