Kyocera K323 Cell Phone User Manual


 
User Guide for the Kyocera K323 Phone v
Hearing Aid Compatibility (HAC) with Mobile Phones
Some mobile phones and hearing devices (hearing
aids and cochlear implants), when used together,
result in buzzing, humming, or whining noises
detected by the user. Some hearing devices are
more immune than others to this interference noise,
and phones also vary in the amount of interference
they generate.
The wireless telephone industry has developed
ratings for some of their mobile phones, to assist
hearing device users in finding phones that may be
compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the
rating on their box or a label on the box.
The ratings are not guarantees and results will vary
depending on the user’s hearing device and hearing
loss. If your hearing device happens to be vulnerable
to interference, you may not be able to use a rated
phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your
personal needs.
M-Ratings Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that are
not labeled. M4 is the better/higher of the two ratings.
T-Ratings Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with a
hearing device’s telecoil (“T Switch” or “Telephone
Switch”) than unrated phones. T4 is the better/higher
of the two ratings. (Note that not all hearing devices
have telecoils in them.)
Hearing devices may also be measured for immunity
to this type of interference. Your hearing device
manufacturer or hearing health professional may
help you choose the proper rating for your mobile
phone. The more immune your hearing aid is, the
less likely you are to experience interference noise
from mobile phones.
For more information about hearing aid compatibility,
visit the FCC's Consumer & Governmental
Affairs Bureau Web site at www.fcc.gov/cgb/dro.
Hearing Aid Compatibility (HAC) rating: M4
Battery and charger specifications
Kyocera Wireless Corp.
10300 Campus Point Drive, San Diego, CA 92121
U.S.A.
Visit us at
www.kyocera-wireless.com
Charger Input Output
CV90-G2968-01 120VAC 60Hz 7W 5.2VDC 400mA
CV90-G2588-01 100-240VAC 50/60Hz 0.2A 4.2VDC 0.6A
CV90-G2589-01 100-240VAC 50/60Hz 0.3A 4.5VDC 1.2A
Standard Battery:
CV90-P3030-05 3.7V 1000mAh
Standard Robust Battery:
CV90-P3031-05 3.7V 900mAh
Extended Battery:
CV90-P3032-03 1800mAh
82-G1698-1EN.book Page v Friday, July 7, 2006 1:10 PM