Filter
Top Products
User Guide for the Kyocera KX12 Phone 9
3. Press and hold the walkie-talkie button. When
the audio path is ready and the group is
available, the “Ready to Speak” tone sounds.
Note: If the group is unavailable or offline, or
if you attempt to take the floor on a group call
while someone else is speaking, the “Bong”
tone sounds.
4. Speak your message while continuing to press
the walkie-talkie button.
5. Release the button when finished speaking
your message. This allows the group members
a chance to reply.
6. Press the walkie-talkie button again to speak.
7. To end the PTT call, press or .
Sending a PTT alert
You can send an alert only to a contact that is
saved in your PTT Contacts list. The recipient can
choose to ignore the alert or accept it and start a
PTT call with you.
Start at the home screen.
1. Press the walkie-talkie button twice.
- or -
Select
Menu → Push to Talk → PTT Contacts.
2.
Scroll through the list and highlight the PTT
contact you want to call.
3. Press to select Alert.
“Alert sent.” appears on your screen, then you
return to the previous screen.
The receiving party’s phone beeps and a
message appears on the phone screen.
There is no time-out period. The alert will
remain on their screen until they accept or
ignore it.
4. If the recipient accepts the alert, you will hear
their voice through your phone. Press the
walkie-talkie button and wait for the “Ready to
Speak” tone (three rapid chirps).
5. Speak your message while continuing to press
the walkie-talkie button.
6. Release the button when finished speaking
your message. This allows the group members
a chance to reply.
7. Press the walkie-talkie button again to speak.
8. To end the PTT call, press or .
Receiving PTT calls and alerts
Receiving a PTT call
When your phone receives a private or group PTT
call, the caller’s voice sounds through the
speakerphone and the phone makes the
“Open Floor” tone.
In a
private call, “PTT Call” appears on the screen
with the caller’s contact name or phone number.
In a
group call, “PTT Group Call” appears with the
name of the group.
1. Press and hold the walkie-talkie button.
82-N8191-1EN.book Page 9 Tuesday, January 17, 2006 2:56 PM