Kyocera KX12 Cell Phone User Manual


 
10 Using Push to Talk
2. Listen for the Ready to Speak tone
(three rapid chirps).
3. Speak while pressing the walkie-talkie button.
4. Release the walkie-talkie button when finished
speaking. This allows another party to reply.
5. Wait for the Ready to Speak tone, then press
the walkie-talkie button again to speak.
6. To end the PTT call, press or .
If the other party ends the call, no action
is required.
Receiving a PTT alert
When your phone receives a PTT alert, the phone
beeps. The name or phone number of the caller
appears on the screen with the message
[name /phone number] requests a PTT call.
Please press the Walkie-Talkie button.
To ignore the alert, press to select
Ignore.
To accept the alert and call the person, press
the walkie-talkie button.
Saving, editing, and erasing PTT
contacts
Adding a PTT contact
You can add new PTT contacts and view their
presence in the PTT contacts directory using the
main PTT menu.
Note: The potential contact will be notified and
must give permission before you can save their
phone number as a contact.
1. Select Menu Push to Talk
PTT Contacts .
2. Press to select Options.
Note: When you are adding your first PTT
contact, you will be asked No PTT Contacts.
Add New? Press to select
Yes.
3. Press to select Add New Contact.
4. Enter the PTT contact number.
5. Press down and enter the PTT
contact name.
If you do not enter a contact name, the contact
phone number will appear on your phone
instead of a name.
6. Press to select Save. The message,
Sending request... appears.
If the PTT contact number is valid and the
other party accepted your request to be
added, Contact Name Added appears.
If the other party refused your invitation or
did not respond within a 3-minute period,
Contact Name Not Added appears.
Note: The other party cannot receive or
respond to your invitation if their phone is off
or if they are outside of the service area.
7. If Contact Name Not Added appears, press
to select
OK and return to the PTT menu.
82-N8191-1EN.book Page 10 Tuesday, January 17, 2006 2:56 PM