Filter
Top Products
User Guide 9
1 Get Started
Phone Battery
Install the Battery
1. Hold the phone face
down.
2. Find the notch on the
bottom of the phone. It is
a rectangle. Using your
thumbnail, pry the cover
up from the bottom to
remove.
3. Place the battery in the
battery casing with the
metal contacts facing
down. The metal
contacts of the battery
must touch the metal
contacts of the battery
casing.
4. Replace the battery
cover by sliding the
notches into the
openings on the top of
the battery casing.
5. Snap the cover into
place.
Charge the Battery
1. Connect the AC
adapter to the
microUSB jack on the
side of the phone.
2. Plug the adapter into a
wall outlet.
The battery icon in the
upper-right corner of the screen tells you
whether the phone is:
– Charging (the icon is animated)
– Partially charged
– Fully charged
You must have at least a partial charge in the
battery to make or receive calls. You can safely
recharge the battery at any time, even if it has a
partial charge.
Note:
Before removing the battery, make sure
the phone is powered off.