Filter
Top Products
121
EnableDUN
Note
v
Before activating DUN, make sure your device has a GPRS SIM card installed, and you
have set up a GPRS odem connections on your device. Also make sure you have GPRS SIM
support DUN, and connected your device to a computer via USB.
v
To use DUN, you have to install the LGUSBWMLModemDriver on your computer. Refer the below site.
www.lgmobile.com
v
When you activate DUN, ActiveSync will be disabled automatically.
To Set up your device as an USB modem
1.
On your device, tap
Start > Programs > EnableDUN.
2.
Plug in the USB cable adapter between your device and the computer.
3.
Tag Activate.
To add your device as a USB modem to your Computer
1.
On your computer, click
Start > Control Panel
.
2.
Double-click Phone and Modem Options.
3.
Click the Modems tab. Select the new modem from the Modem list, then double click the new
Modem.
4.
On the Advanced tab, add following AT command to the Extra initialization commands:
AT+CGDCONT=1, "ip", "<access point name>"
Note
v
For example, at+cgdcont=1,”ip”,”isp.cingular”