Filter
Top Products
Getting Started
24
Getting Started
Unlock function
If you press , a popup screen appears
asking you to input the Security code to
unlock the phone. The Security code is
configured in the Change codes (#. Settings
> 1. Phone settings > 5. Security > 3. Change
codes). If you key in an incorrect Security
Code, the phone will remain in Handset lock
status. If you key in the correct Security
code, the phone will be unlocked, and the
idle screen will be displayed. If you have
turned the phone off in the Handset lock
status, you will find the phone remains in
Handset lock status when you turn it on.
Barring password
This service obstructs calling service in some
conditions. This condition can be edited
using the Call barring feature (#. Settings >
5. Call settings > 2. Call barring). The barring
password is required when you use the call
barring function. The password is obtained
from your network operator's customer
service when you subscribe to this service.
While this service is activated, the caller will
hear the information message that the call is
not connected because of the call barring.
KU970_Eng(AUS)_0312 07.03.12 11:3 AM Page 24