Filter
Top Products
Settings
Fixed dial numbers (Menu #.5.3)
]
FDN ON/OFF: Select whether to activate
FDN or not. PIN authentication is required.
]
FDN List: Displays the current FDN list.
You can edit, add, or delete fixed dial
numbers. PIN2 authentication is required
to edit the list. And the configuration
information is saved on the USIM. The
information saved on the USIM is used
when FDN restricts outgoing calls.
Data volume (Menu #.5.4)
Allows you to check the sent, received and all
data volume transferred. (Data volume
transferred through TE connection is
excluded from counting.)
Press the left soft key [Options] to choose
for partial initialization or entire initialization.
You can also use the right soft key [Clear]
for the initialization of the selected volume
type. Initialization will require your Security
code.
Call costs (Menu #.5.5)
1. This function displays the call costs of the
Last call and All calls.
2. To initialise, press the right soft key
[Clear] and enter the PIN2 code.
3. You can select either Units or Currency in
Set call cost. According to your setting,
the call cost is displayed during a call (If
USIM and Network support Advice Of
Charge(AOC)).
4. In the Set limit configuration, select On
to configure the cost limit. When a cost
limit is configured, and the call costs reach
the limit, making a call will not be allowed.
83
KU970_Eng(AUS)_0312 07.03.12 11:4 AM Page 83