Filter
Top Products
Making a Call
When you make a call, follow these simple steps:
1. Make sure the phone is turned on.
G
If not, press .
2. Enter the phone number, with area code if needed.
3. Press .
G
If the phone is locked, enter the lock code.
G
Call Failed indicates that the call did not go
through.
G
*
Restricted
*
indicates that your outgoing calls
are in restricted mode. You can only dial phone
numbers saved in the Emergency or Phone
Book list.
To turn off this function:
Menu-> , -> Security-> Enter Lock
Code -> Restrict -> Off -> OK
4. Press to end the call.
When one-touch is enabled, enter the Phone Book
speed dial number or hold the last digit until the call
is made.
NOTE
Phone number and entry name appear on the
display when you enter the speed dial number
and hold the last digit.
27
VX4400
Basic Functions
Chapter 2. Basic Functions
Turning the Phone On and Off
Turning the Phone On
1. Install a charged battery pack or connect the phone
to an external power source such as the cigarette
lighter adapter or car kit.
2. Press for a few seconds until the red lamp
flashes.
G
Fully extend the antenna for the best
performance.
NOTE
Like any other radio device, avoid any
unnecessary contact with the antenna while
your phone is on.
Turning the Phone Off
1. Press and hold until display screen turns off,
then release the key.
2. Protect the antenna by pushing it back into the
phone, if extended.
26
Basic Functions
VX4400(E)-26 11/1/02 5:19 PM Page 26