Filter
Top Products
35
34
4.Call Connect
(MENU )
Alert sound to notify the user when the call is
connected.
Display (MENU )
Backlight
(MENU )
Choose the settings of the LCD and keypad backlight.
“10 seconds” turns the backlight off 10 seconds after
the last key was pressed. “30 seconds” waits 30
seconds after the last key was pressed. “On when
Flip open” means that the backlight is always on while
flip is open. “Always on” means that the backlight is
on regardless of the flip’s status. Choosing “Always
on” significantly decreases talk time. “Always off”
means that the backlight is never on.
Banner
(MENU )
Enter the banner (up to 16 characters) that is
displayed on the top line when the phone powers up
and when it is in standby mode. Press Soft Key 1
OPT and press Soft Key 1 SEL select [Edit] using
the [ ] button, to make changes to the existing
banner. Enter the characters as you would when
storing a name tag to a memory location. Then
press Soft Key 1 SAVE .
Theme
(MENU )
You can set up the screen displayed on the LCD
screen in the standby mode.(Default, Star theme)
Auto Hyphen
(MENU )
Set hyphen option. When on, this automatically inserts
hyphens to be consistent with U.S. phone numbers.
System (MENU )
Set NAM
(MENU )
Select the phone’s NAM (Number Assignment
Module) if the phone is registered with multiple
service provides.
Auto NAM
(MENU )
Allows the phone to automatically switch to one of
the programmed Telephone No. if it is operating in
the corresponding service provider area.
Force Mode
(MENU )
Make next call in analog mode. You have 30 seconds
to place an analog call. This feature is typically used
for data applications.
System Select
(MENU )
Choose setting to control which cellular company
your phone uses. Leave this setting as default
unless you want to alter the system selection.
(As instructed by your communication provider.)
Home is A (Automatic-B, Home only, Automatic-A
or Home only, Automatic) is displayed.
Version
(MENU )
View the software and PRL version.
Serving Sys.
(MENU )
You can identify the Channel number of System
which is served and SID Number.
This information is only for technical support.