Filter
Top Products
85
password and click "Next". The
default password is "0000".
You can change the password
in Settings > Wireless &
Networks > On-Screen Phone
Settings.
Click "OK" to exit the window.
NOTE:
Go to Settings > SD card &
phone storage settings and make
sure that the “Mass storage only”
checkbox is deselected.
Wireless connection with
Bluetooth:
On your mobile phone, go
to Settings > Wireless &
Networks > Bluetooth settings.
Select Turn on Bluetooth and
then select Discoverable.
If you have previously connected
using a cable, run the New
Connection Wizard to create a
new connection.
Run the Connection Wizard on
the computer, select "Bluetooth
connection", then "Next".
4
1
2
3
The wizard will start searching
for Bluetooth-enabled mobile
phones. When the mobile phone
you want to connect to appears,
click "Stop" to stop searching.
Select "LG P925g" from the
device list and click "Next". You
can rename the device if you
wish.
Enter the PIN code (e.g. "0000")
and click "Next".
On your mobile phone, accept the
request and enter the same PIN
code, then touch "OK".
Enter the On-Screen Phone
password and click "Next". (The
default password is "0000").
Touch "OK" to exit.
To check the phone-to-
PC connection
Once the devices have been
connected, drag down the notification
bar at the top of the home screen
to check the On-Screen Phone
connection status.
4
5
6
7
8
9