Filter
Top Products
19
GETTING STARTED WITH YOUR PHONE
Making Calls
1. Make sure the phone is turned on. If not, press
for about 3 seconds.
2. Enter the phone number (include the area code if
needed).
3. Press .
lf the phone is locked, enter the lock code.
Call Failed - indicates the call did not go through.
Restricted - indicates outgoing calls are in
restricted mode.
4. Press to end the call.
Correcting Dialing Mistakes
If you make a mistake while dialing a number, press
once to erase the last digit entered, or hold
down for at least 2 seconds to go to the
standby mode.
Redialing Calls
1. Press twice to redial the last number you
dialed. The last 30 numbers are stored in the call
history list and you can also select one of these to
redial.
Receiving Calls
1. When the phone rings or vibrates, press to
answer.
2. Press twice to end the call.
Note
If you press or (the side keys) while the phone is
ringing, the ringing or vibration is muted for that call.
Note
If the phone is restricted, you can only dial phone
numbers saved in the Emergency Numbers or your
Contacts. To turn off this function: Menu ->
Settings -> Security -> Enter Lock
Code -> Restrict Calls -> Off -> OK (The default
lock code is the last 4 digits of your phone number.)
UX390_Eng.qxd 7/7/06 6:00 PM Page 19