Filter
Top Products
1.6 Power On/Off Tone
Allows you to set the phone to sound a tone when
the phone is powered on and off.
1. Press , , , .
2. Use to set to
On
/
Off
, then press .
1.7 DTMF Length
Allows you to set the Key tone length and touch tone
playback speed.
1. Press , , , .
2. Select an option, then press .
Normal
Sends out a tone for a fixed period of
time even if you keep the key pressed.
Long
Sends out a continuous tone for as long
as you keep the key pressed.
2. Display
Options to customize the phone’s display screen.
2.1 Banner
Allows you to enter a string of up to 16 characters
which display on the LCD screen.
1. Press , , , .
2. Enter your banner text, then press .
2.2 Backlight
Allows you to set the duration for illuminating the
backlight. LCD and Key Light Timer are set separately.
2.2.1 LCD
1. Press , , , , .
2. Choose a sub-menu, then press .
Timer/ Brightness
69
SETTINGS
Note
If an amount of time is set for the timer option, the time
starts after the last key was pressed.
Note
Dual-Tone Multi Frequency (DTMF) Signaling by the
simultaneous transmission of two tones, one from a group
of low frequencies and another from a group of high
frequencies. Each group of frequencies consists of four
frequencies. Setting the Key Beep length to Long will
extend the DTMF tone.
UX390_Eng.qxd 7/7/06 6:01 PM Page 69