Filter
Top Products
59
Auto Answer
(
Menu
Press two times,
)
Select the ring type before the phone
automatically answers a call. This
feature is used only with the car kit.
1. Press Soft Key 1 Menu.
2. Press two times and press
Auto Answer.
3.
Select an option and press Soft Key
1
Ok.
Off
after 1 ring (or melody for 5 seconds)
after 3 rings (or melody for 10 seconds)
When you have an incoming call, the phone
automatically responds after 1 ring/ 3 rings.
Auto Answer works only when the cellcase is open.
58
Menu Features
Data Baud
(
Menu Press two times, ,
)
This setting enables the subscriber
terminal to set the data baud.
1. Press Soft Key 1
Menu
.
2. Press two times.
3. Press
Data Setting and press
Date Baud.
4. Select an option, press Soft Key 1
Ok
.
Data Baud set 19,200/115,200 /230,400
Data Baud needs to be set properly based on
carrier’s network. Contact carrier for the maximum
available speed.
When using 1X HSPD data service by means of a
RS-232C data cable, data baud shall be set to 115,200.
(230,400 shall not be supported). When using 1X
HSPD data service by means of USB data cable, you
may get better data speed if the data baud is set to
230,400 rather than 115,200.