Filter
Top Products
Command-Line Interface
Bridging commands
CellPipe™ 20 Series User’s Guide 3-3
Returning to the main menu
To return to the main commands, enter the home command:
>lan> home
Displaying second-level commands
To select a second-level command, enter the command at the > prompt:
>adsl> show
Saving configurations
To save a value or configuration, enter the save command and type y:
>> save
Are you sure that you want to save the new changes?(y/n)y
Note: All settings have to be saved to take effect.
Bridging commands
The default main menu list of commands is for bridging. To display a list of bridging
commands, enter the help command.
>> help
The following main menu commands are displayed for bridging mode:
xdsl* - entry to xdsl menu
default - set all configuration to factory setting
lan - entry to Ethernet
list - list status for enabled PVC
manage - entry to management menu
mode - exit this menu and change modem mode
ping - ping IP for testing purpose
quick - quick setup
r1483 - entry to RFC 1483 menu
restart - reboot modem