Filter
Top Products
Configuring a 20 Series CellPipe
Configuring WAN interface
4-4 CellPipe™ 20 Series User’s Guide
>sdsl> smbit <Normal|Reverse>
Select the status command to display the configuration and status of the current
SDSL setting. For example:
>sdsl> status
>version : Ver 2.31 Date 19/Feb/2001
terminal - cpe
auto - enable
rate - 2320
maxrate - 2320
smbit - reverse
dbit - normal
scramble - enabled
cell - disabled
Status :
Bitpump F/W Version : 5.1
Bitpump : present
CO/RT Select : cpe
Auto Rate : enable
Current Rate : 272
Max Rate : 2320
Sign/Magnitude Bit Sequence : reverse
Data Bit Polarity : normal
DSL Status : during startup
Line Quality : -16.0
Attenuation : 31.5
Select the terminal command to configure the modem to COE or CPE mode.
>sdsl> terminal <Coe>|<CPe>
ADSL commands and configurations
The following is a list of the menus available under the adsl command:
abort - abort ADSL line
bitdn - ADSL downstream bit loading value
bitup - ADSL upstream bit loading value