Nokia 12115i Cell Phone User Manual


 
Messaging
47
Automate voicemail
To automatically access your voicemail messages, you can insert special characters
called dialing codes into phone numbers and save the number to a speed dial location.
Dialing codes instruct the receiving system to pause, wait, bypass, or accept the
numbers that follow them in the dialing string.
Voicemail services vary by service provider. The following instructions are examples
of common operations. Please check with Virgin Mobile for specific instructions for
using your voicemail service.
Voicemail box number and process
1. Write down your voicemail box number.
2. Call and check your voicemail as you normally would.
3. Write down your step-by-step interaction with the recorded prompts. Remember
that each voicemail service varies. Your steps may resemble the following:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234 and *.
Be precise; you need this information to set up your voicemail with dialing codes.
Dialing codes
Press * repeatedly to cycle through dialing codes. When the desired code appears in
the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
Dialing code Indicates...
*
Bypasses a set of instructions.
+
Causes the International access code to be replaced by +.
p
Pauses for 2.5 seconds before sending any numbers that follow.
w
Waits for you to press Call before sending the numbers or codes
that follow.