Filter
Top Products
Settings
62
Set the auto-update
Auto-update is a network service. See "Network Services," page 7.
You can allow the digital network to set the clock, which is useful when you are out
of your home area (for example, when you travel to another network or time zone).
At the start screen, select Menu > Settings > Time and date settings > Auto-update
of date & time > On, Confirm first, or Off.
If you use the Auto-update of date & time option while outside your digital network,
you may be prompted to enter the time manually. Network time will replace the
time and date when you re-enter your digital network.
If your battery is removed or discharged outside the digital network, you may be
prompted to enter the time manually (when the battery is replaced or recharged
and you are still outside of the digital network).
■ Voice navigation
Voice navigation allows you to quickly perform certain commands by speaking them,
instead of using the keypad to access them. For example, you can switch your profile,
call voicemail, playback a voice memo, or review recent calls by speaking the
recorded command.
Add a voice command
Before using a voice command, you must add the command to the phone function
by recording it.
1. At the main screen, select Menu > Settings > Voice navigation.
2. Select the phone function you wish to tag: Profiles, Voice mailbox, Voice memo,
or Recent Calls.
3. If necessary, select an option associated with that function, and select
Options > Add command.