Filter
Top Products
[ 78 ]
SEND A TOUCH TONE STRING
1 Press Menu 4-3-2-1 (Menu > Settings > Phone settings > Touch
tones > Manual touch tones).
2 Make sure that the setting is not set to Off. If it is, scroll to one of the
other options and press Select.
3 Then, during your call, press Options, scroll to Touch tones and
press Select.
4 Enter the touch tone string or recall the string from the phone book,
and press OK.
If you send touch tones while in the analog mode, be careful not to send
confidential information.
• LINK PHONE BOOK ENTRIES
This feature allows you to store a phone number in one phone book
location and link it to another phone book entry.
For example, linking the phone number of an automated service (example:
automated banking service) with a touch tone string entry in your phone
book (example: account and PIN numbers) automatically recalls and
sends the touch tone string when you call the service.
USE LINKING OPTIONS
1 Store the touch tone string into your phone book.
2 Assign the phone book entry with the touch tones to a one-touch dialing
location (example: location 3). For more information on 1-touch dialing,
see “Use 1-touch dialing” on page 75.
3 Edit the automated service’s phone number by adding +n to the end
of the phone number (where n is the 1-touch dialing location).
Example: 214-555-1234+3
4 Press OK to save your changes.