Filter
Top Products
Set up your phone
16
Replace the battery
1. Insert the battery,
gold colored contact
end first, into the
battery slot.
2. Push down on the other
end of the battery to snap
the battery into place.
Replace the back
cover
1. Set the back cover on the
phone with the cover tabs
aligned with the slots in
the phone.
2. Slide the back cover
toward the top of the
phone until the back cover is securely in place.
Charge the battery
Note: Check the model number of any charger before use with this
device. This device is intended for use when supplied with power from
the AC-3 or AC-4 charger.
1. Plug the charger transformer into a standard ac outlet.
2. Insert the charger output
plug into the round jack
at the bottom end of
the phone.
After a few seconds, the
battery indicator in the
display starts to scroll
from bottom to top. If
the battery is completely
discharged, it may take a few minutes before the charging indicator appears
on the display or before any calls can be made.
When you disconnect the power cord of any enhancement, grasp and pull the
plug, not the cord.