Filter
Top Products
Set up your phone
17
■ Turn your phone on or off
1. To turn your phone on or off, press and hold the end key for at least 4 seconds.
2. Enter the lock code, if necessary, and select OK. See "Change lock code," p. 56.
Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
■ Connect the headset
A compatible headset, such as HS-5 or HS-9, may be purchased with your phone,
or separately as an enhancement. See "Enhancements," p. 71.
1. Plug the HS-5 headset connector into
the Pop-Port connector at the bottom
end of your phone or, plug the HS-9
headset connector into the 2.5 mm
headset jack located on the side of
your phone to allow hands-free
operation.
appears in the standby mode.
2. Position the headset on your ear.
With the headset connected, you can
make, answer, and end calls as usual.
• Use the keypad to enter numbers.
• Press the call key to place a call.
See "Phone at a glance," p. 9.
• Press the end key to end a call.
■ Make a call
Note: Before making or receiving a call, fully extend the whip antenna.
Keypad
1. Enter the phone number (including the area code), and press the call key.
(To delete a character to the left of the cursor, select Clear.)
2. Press the end key to end the call, or select End call to cancel the call attempt.