Filter
Top Products
Tunes
43
Mono output or Stereo output—Listen to the radio in monaural mode (default) or
in stereo. Stereo output is available through a stereo enhancement.
Loudspeaker or Headset—Listen to the radio through the speakerphone or through
the headset.
Set frequency—Manually enter the frequency of a known radio station.
To set the radio frequency, press * and use the keypad to enter the frequency of a
known radio station.
To adjust the radio volume, press the volume up and down keys.
When an application using a browser connection is sending or receiving data, it
may interfere with the radio.
When you place or receive a call, the radio automatically mutes. When the call
ends, the radio switches back on.
Tune and save a radio channel
You can save a preset station to any one of 20 locations in memory.
1. With the radio on, select or to change the radio frequency in 0.1 MHz
steps, or select and hold or to start the channel search. Searching stops
when a channel is found.
2. To save the channel, select Options > Save channel.
3. Enter a name for the channel, and select OK.
■ Voice recorder
This feature enables you to record pieces of speech or sound with your device
and listen to them later. The total available time is 3 minutes with no memos
stored. The maximum length of a recording depends on how much memory
remains available.
In the standby mode, select Menu > Tunes > Voice memo > Record to start
the recording or Recordings list to manage the folder you have defined for
recording storage.
Record speech or sound
1. In the standby mode, select Menu > Tunes > Voice memo > Record.
2. After you hear the recorder start tone, begin recording speech or sound.
3. When you finish recording, select Stop and your recording is saved to the
Tones folder in My Stuff.