Filter
Top Products
Settings
68
USB data cable
You can use the USB data cable to transfer data between the phone and a compatible
PC or a printer supporting PictBridge. You can also use the USB data cable with
Nokia PC Suite. A USB data cable can be purchased as an accessory.
To activate the phone for data transfer or image printing, connect the data cable;
when the phone displays USB data cable connected. Select mode., select OK.
Select from the following modes:
Default mode — to use the cable for PC Suite
Printing — to print images directly from the phone using a compatible printer
To change the USB mode, select Menu > Settings > Connectivity > USB data
cable > Default mode, Printing, or Data storage.
■ Call
Select Menu > Settings > Call settings and from the following options:
Call forwarding — to forward your incoming calls (network service). You may not
be able to forward your calls if some call restricting functions are active. See Call
restrictions in "Security," p. 70.
Anykey answer > On — to answer an incoming call by briefly pressing any key except
the power key, the camera key, the left and right selection keys, or the end key
Automatic redial > On — to make a maximum of 10 attempts to connect the call
after an unsuccessful call attempt
Speed dialing > On — to dial the names and phone numbers assigned to the speed
dialing keys 2 to 9 by pressing and holding the corresponding number key
Call waiting > Activate — to have the network notify you of an incoming call
while you have a call in progress (network service). See "Call waiting," p. 21.
Summary after call > On — to briefly display the approximate duration and cost
(network service) of the call after each call
Send my caller ID > Yes — to show your phone number to the person you are calling
(network service). To use the setting agreed upon with your service provider, select
Set by network.
Line for outgoing calls — to select the phone line 1 or 2 for making calls if supported
by your SmartChip card (network service).
6126.EN_ESv1_BIL_9249003_Cingular_UG.book Page 68 Friday, May 26, 2006 1:22 PM