Filter
Top Products
Settings
69
■ Phone
Select Menu > Settings > Phone settings and from the following options:
Language settings — to set the display language of your phone, select Phone
language. If you select Automatic, the phone selects the language according
to the information on the SmartChip card.
To set a language for the voice playback, select Voice playback language. See
"Enhanced voice dialing," p. 20 and Voice commands in "My shortcuts," p. 63.
Security keyguard — to set the phone to ask for the security code when you
unlock the keyguard. Enter the security code, and select On.
Welcome note — to write the note you would like to have briefly displayed when
the phone is switched on
Flight query > On — the phone asks every time when it is switched on whether
the flight profile shall be used. With flight profile all radio connections are switched
off. The flight profile should be used in areas sensitive to radio emissions.
Phone updates — to receive phone software updates from your service provider
(network service). This option may not be available, depending on your phone.
See "Phone software updates," p. 71.
Operator selection > Automatic — to set the phone to automatically select one of
the cellular networks available in your area. With Manual you can select a network
that has a roaming agreement with your service operator.
Help text activation — to select whether the phone shows help texts
■ Enhancements
This menu or the following options are displayed only if the phone is or has been
connected to a compatible mobile enhancement.
Select Menu > Settings > Enhancements. Select an enhancement, and depending
on the enhancement, from the following options:
Default profile — to select the profile that you want to be automatically activated
when you connect to the selected enhancement
Automatic answer — to set the phone to answer an incoming call automatically
after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic
answer is off.
Lights — to set the lights permanently On. Select Automatic to set the lights
on for 15 seconds after a key press.
TTY/TDD > Use TTY > Yes — to use the text phone settings instead of headset
or loopset settings
6126.EN_ESv1_BIL_9249003_Cingular_UG.book Page 69 Friday, May 26, 2006 1:22 PM