Nokia 6210 Cell Phone User Manual


 
14
Standby mode
When you have switched on the device, and it is registered to a network, the device is in the
standby mode and ready for use.
To select the view for the standby mode, select > Settings > Phone sett. > General >
Personalization > Standby mode > Standby theme.
Keep your device away from magnets or magnetic fields as they may cause some
applications to activate unexpectedly.
Shortcuts in the standby mode
To open a list of most recently dialed numbers, press the call key.
To call your voice mailbox, press and hold the 1 key.
To use the voice commands or voice dialling, press and hold the right selection key.
To listen to new received messages, press and hold the left selection key until Msg. reader starts.
To change the profile, briefly press the power key, and select a profile.
To quickly change to silent profile from any other profile, press and hold #.
To start a connection to the web, press and hold 0.
Depending on the selected standby theme, you can select applications or events to add to a
shortcut list in the standby mode or the scroll keys. To select the applications or events,
select > Settings > Phone sett. > General > Personalization > Standby mode > Shortcuts.
Offline profile
To quickly activate the Offline profile, in the standby mode, briefly press the power key,
and select Offline. To leave the Offline profile, briefly press the power key, and select
another profile.
When the Offline profile is active, all the connections to a cellular network are turned off.
However, you can use your device without a SIM card, and listen to the radio or music using
the Music Player. Remember to switch off your device when wireless phone use is prohibited.
Important: In the offline profile you cannot make or receive any calls, or use other
features that require cellular network coverage. Calls may still be possible to the
official emergency number programmed into your device. To make calls, you must
first activate the phone function by changing profiles. If the device has been locked,
enter the lock code.