Nokia 6256 Cell Phone User Manual


 
16 Copyright © 2004 Nokia
Remove the back cover
1. With the back of the phone facing you,
push down on the back cover.
2. Slide the back cover toward the bottom
of the phone and remove.
Remove the battery
After you have removed the back cover,
insert your finger into the finger grip, and
lift the battery from its compartment.
UIM (CDMA SIM) card slot
Your phone has a UIM card slot built into
the mechanics. However, the UIM is not functional in this phone model. Avoid
placing anything into the UIM card slot.
Install the MMC card
Before installing the MMC card, always
make sure that the phone is switched off
and that you have removed the cover
and battery.
Open the MMC holder by lifting the
latch(1) and lifting the holder up (2).
Insert the MMC card into the holder
with the gold-colored contacts facing
down, matching up with the gold-
colored contacts on the phone. The
beveled corner of the card fits into the
beveled corner of the slot.
Close the UIM/MMC holder and
replace the battery.