Filter
Top Products
70 Copyright © 2004 Nokia
Activate a voice command
After you have associated a voice tag with a phone function, you can issue a
command by speaking the voice tag.
1. Press and hold Names.
2. When Please speak now appears, pronounce the voice tag clearly into
the microphone.
When the phone finds the voice tag, Found: appears, and the phone plays the
recognized voice tag through the earpiece. The function you requested is activated.
Options
After you have associated a voice tag to a command, you can choose one of the
following options:
• Select Playback to listen to the voice command tag.
• Select Change to change the voice command.
• Select Delete to erase the voice command tag.
Voice recorder
This feature allows you to record pieces of speech or sound with your phone and
listen to them later. The total available time is 30 seconds if no memos have been
stored. The maximum length of a recording depends on how much memory remains
available.
Record speech or sound
1. At the start screen, select Menu > Media > Voice recorder > Record.
2. After the recorder start tone is heard, begin recording speech or sound.
3. When you are finished recording, press Stop.
4. Enter the title you wish to assign to the recording, and press OK.
Options
After you have saved the recording to the Recordings list, highlight the recording,
and choose one of the following options:
• Select Playback to listen to the recording using the earpiece.
• Select Delete to erase the recording.
• Select Edit title to rename the recording.
• Select Add alarm to add an alarm to the recording.