Filter
Top Products
13
Important: Do not remove the memory card in the middle of an operation when
the card is being accessed. Removing the card in the middle of an operation may
damage the memory card as well as the device, and data stored on the card may
be corrupted.
■ Remove the microSD card
You can remove or replace the microSD card during phone operation without
switching the phone off.
1. Make sure that no application is currently accessing the micro SD memory
card.
2. Open the memory card holder.
3. Press the microSD card slightly in to release the locking.
4. Remove the microSD card from the slot.
■ Charge the battery
Check the model number of any charger before use with this device. This device is intended
for use when supplied with power from an AC-3, AC-4, AC-5 or CA-70 charger.
Warning: Use only batteries, chargers, and enhancements approved by Nokia for
use with this particular model. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When
you disconnect the power cord of any enhancement, grasp and pull the plug, not
the cord.
1. Connect the charger to a wall socket.
2. Connect the lead from the charger to the charger
connector as shown.
A CA-44 charger adapter can be used with older
charger models.
If the battery is completely discharged, it may take a
few minutes before the charging indicator appears
on the display or before any calls can be made.