Filter
Top Products
22
To activate the Call waiting function, see “Call,” p. 45.
■ Options during a voice call
Many of the options that you can use during a call are network services. For
availability, contact your service provider.
During a call, select Options and from the following:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record or
Loudspeaker.
Network services options are Answer or Reject, Hold or Unhold, New call, Add to
conference, End call, End all calls, and the following:
Send DTMF — to send tone strings
Swap — to switch between the active call and the call on hold
Transfer — to connect a call on hold to an active call and disconnect yourself
Conference — to make a conference call
Private call —to discuss privately in a conference call
Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
■ Make a video call
During operation, for example, during an active video call or highspeed data
connection, this device may at times feel warm. In most cases, this is normal, not a
fault. If you suspect the device is not working properly, take it to the nearest
authorized service facility for service.
When you make a video call, you send a real-time video to the recipient of the call.
The video image captured by the VGA camera above the main display, is shown to
the video call recipient.
To be able to make a video call, you must have a USIM card and be connected in a
WCDMA network. For availability of and subscription to video call services,
contact your network operator or service provider. A video call can only be made
between two parties. The video call can be made to a compatible phone or an
ISDN client. Video calls cannot be made while another voice, video, or data call is
active.
1. To start a video call, enter the phone number in the standby mode, or select
Contacts and a contact.