Filter
Top Products
55
Save radio frequencies
1. To start the search, select and hold or . To change the radio frequency in
0.05 MHz steps, briefly press or .
2. To save a frequency to a memory location, 1 to 9, press and hold the
corresponding number key. To save a frequency to a memory location from 10
to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9.
3. Enter the name of the radio station.
Listen to the radio
Select Menu > Media > Radio. To scroll to the desired frequency, select or ,
or press the headset key. To select a radio station, briefly press the corresponding
number keys. To adjust the volume, press the volume keys.
Select from the following options:
Switch off — to turn off the radio
Save station — to save a new station (shown if a new station is detected)
Loudspeaker or Headset — to listen to the radio using the loudspeaker or headset
Mono output or Stereo output — to listen to the radio in monophonic sound or in
stereo
Stations — to select the list of saved stations. To delete or rename a station, scroll
to the desired station, and select Options > Delete station or Rename. Select
Visual service ID to enter a service ID given by the visual radio service provider
(network service)
Search all stations — to search for new radio stations
Set frequency — to enter the frequency of the desired radio station
Station directory — to activate the station directory to seek available radio
stations from the network and save them for later use
Enable visual service — to allow or deny the viewing of visual content of the
current radio station (network service). To check the availability and costs, and to
get the necessary settings to your phone, contact your service provider.
When an application using a packet data or HSCSD connection is sending or
receiving data, it may interfere with the radio.