Filter
Top Products
You can search for a name or phone number that you have saved in Contacts. See "Search for a contact," p. 22. Press the call
key to call the number.
To access the list of dialed numbers, press the call key once in the standby mode. To call the number, select a number or name,
and press the call key.
Dialing shortcuts
Assign a phone number to one of the number keys, 2 to 9. See "Dialing shortcuts," p. 23.
Call the number in one of the following ways:
Press a number key, then the call key.
OR
If Speed dialling is set to On, press and hold a number key until the call begins.
Further details are described in Speed dialling. See "Call," p. 26.
Enhanced voice dialing
You can make a phone call by saying the name that is saved in the contact list of the device.
Voice commands are language-dependent. Set the Recognition lang. before using voice dialing. See "Phone," p. 27.
Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely
upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key or the volume down key. A short tone sounds, and Speak
now is displayed.
2. Speak the voice command clearly. If the voice recognition is successful, a list with matches is shown. The device plays the
voice command of the first match on the list. If it is not the correct command, scroll to another entry.
Using voice commands to carry out a selected device function is similar to voice dialing. See "Voice commands," p. 25.
Answer or reject a call
To answer an incoming call, press the call key. To end the call, press the end key.
To reject an incoming call, press the end key. To mute the ringing tone, select Silence.
To answer a waiting call during an active call (network service), press the call key. The first call is put on hold. To end the active
call, press the end key. You may also activate the Call waiting function. See "Call," p. 26.
Options during a call
Many of the options that you can use during a call are network services. For availability, contact your service provider.
During a call, select Options and from the following options:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Voice clarity, Loudspeaker or Handset.
Network options are Answer or Reject, Hold or Unhold, New call, Add to conference, End call, End all calls, and the following:
• Send DTMF — to send tone strings
• Swap — to switch between the active call and the call on hold
• Transfer — to connect a call on hold to an active call and disconnect yourself
• Conference — to make a conference call
• Private call — to have a private discussion in a conference call
Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely
loud.
5. Write text
Text modes
To enter text (for example, when writing messages) you can use traditional or predictive text input.
When you write text, press and hold Options to toggle between traditional text input, indicated by , and predictive text
input, indicated by
. Not all languages are supported by predictive text input.
W r i t e t e x t
© 2007 Nokia. All rights reserved.
13