Filter
Top Products
• Voice clarity — Select Active to enhance speech intelligibility especially in noisy environments.
• Anykey answer — Select On to answer an incoming call by briefly pressing any key, except the power key, the left and right
selection keys, or the end key.
• Automatic redial — Select On to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt.
• Speed dialling — Select On to dial the names and phone numbers assigned to the number keys 2 to 9 by pressing and
holding the corresponding number key.
• Call waiting — Select Activate to have the network notify you of an incoming call while you have a call in progress (network
service).
See "Answer or reject a call," p. 13.
• Summary after call — Select On to briefly display the approximate duration after each call.
• Send my caller ID — Select Yes to show your phone number to the person you are calling (network service). To use the
setting agreed upon with your service provider, select Set by network.
• Outgoing call line — to select the phone line 1 or 2 for making calls if supported by your SIM card (network service)
Phone
Select Menu > Settings > Phone and from the following options:
• Language settings — To set the display language of your device, select Phone language. Automatic selects the language
according to the information on the SIM card. To select the USIM card language, select SIM language. To set a language for
the voice playback, select Recognition lang.. See "Enhanced voice dialing," p. 13.
• Security keyguard — To set the device to ask for the security code when you unlock the keyguard. enter the security code,
and select On.
• Automatic keyguard — to lock the keypad automatically after a preset time delay when the device is in the standby mode
and no function of the device has been used. Select On, and set the time.
• Welcome note — to write the note that is shown when the device is switched on
• Flight query — The device asks every time when it is switched on whether you want to use the flight profile. With the flight
profile, all radio connections are switched off. The flight profile should be used in areas sensitive to radio emissions.
• Phone updates — to receive software updates from your service provider (network service). This option may not be available,
depending on your device.
See "Software updates over the air," p. 28.
• Operator selection — Select Automatic to set the device to automatically select one of the cellular networks available in
your area. With Manual you can select a network that has a roaming agreement with your service provider.
• Confirm SIM actions — See "SIM services," p. 40.
• Help text activation — to select whether the device shows help texts
• Start-up tone — The device plays a tone when it is switched on.
Enhancements
This menu or the following options are shown only if the device is or has been connected to a compatible mobile enhancement.
Select Menu > Settings > Enhancements. Select an enhancement, and depending on the enhancement, from the following
options:
• Default profile — to select the profile that you want to be automatically activated when you connect to the selected
enhancement
• Automatic answer — to set the device to answer an incoming call automatically after 5 seconds. If Incoming call alert: is
set to Beep once or Off, automatic answer is off.
• Lights — to set the lights permanently On. Select Automatic to set the lights on for 15 seconds after a keypress.
• Text phone — Select Use text phone > Yes to use this settings instead of headset or loopset settings.
If your device is provided with a hearing aid coil, select Hearing aid > T-coil hrng. aid mode > On to optimize the sound quality
when using a t-coil hearing aid. is shown when T-coil hrng. aid mode is active.
Configuration
You can configure your device with settings that are required for certain services. Your service provider may also send you these
settings.
See "Configuration setting service," p. 7.
Select Menu > Settings > Configuration and from the following options:
• Default config. sett. — to view the service providers saved in the device. To set the configuration settings of the service
provider as default settings, select Options > Set as default.
• Activ. def. in all apps. — to activate the default configuration settings for supported applications
• Preferred access pt. — to view the saved access points. Scroll to an access point, and select Options > Details to view the
name of the service provider, data bearer, and packet data access point or GSM dial-up number.
• Connect to support — to download the configuration settings from your service provider
• Device manager sett. — to allow or prevent the device from receiving software updates. This option may not be available,
depending on your device.
See "Software updates over the air," p. 28.
S e t t i n g s
© 2007 Nokia. All rights reserved.
27