Filter
Top Products
12
3. GETTING STARTED
Installing the Battery
To install the Battery:
1
Place the battery onto the rear of
the phone (1).
2
Push the battery towards the catch
until it clicks into place (2).
3
Make sure the battery is properly
installed.
To remove the Battery:
1
Switch off the power before removing the battery.
2
Press the locking catch at the top of the battery and slide the
battery down and off the phone.
Battery Charge Indication
The vertical bar to the right of the indicator B on the right
side of the phone display shows the battery charge level.
The higher the bar, the more power left in the battery.
Charging a Battery
1
Install the battery and connect the charger to the base of the
phone.
2
Connect the charger to a standard AC wall outlet. Segments of
the battery indicator bar on the right-hand side of the display
start scrolling and a confirmation tone is emitted.
•
You can use the phone during the charging, but the charging
process will be reduced for the duration of the call.
•
After the segments of the battery indicator bar stop scrolling
and the bar is entirely displayed, the battery is fully charged.
3
Disconnect the charger from the power outlet and phone.
2.
1.
c1caus.frm Page 12 Thursday, December 19, 1996 12:46 PM