Filter
Top Products
43
Adding a Pause Character
If the device to which you are sending the DTMF string, needs to
receive the number slowly or after a pause, insert one or more
pause characters of 2.5 seconds between the required DTMF digits.
To create a pause character (p):
1
Press the MENU key first and then the # key. (For example, if
you want to send your password as DTMF tones with a 'p' char-
acter between each digit, the string should be sent as
1p2p3p4.)
Adding a Wait Character
For automatic dialing, you can store the DTMF string within the
same memory location as the access phone number by inserting a
wait character between the phone number and the DTMF number.
To create a wait character (w):
1
Press the MENU key once and then the # key twice.
To send a DTMF sequence containing a wait character, see Auto-
matic Dialing on page 42.
Call Waiting
Your cellular service provider may offer a call waiting option. This
network feature allows you to make or answer a second call while
you already have a call in progress.
To initiate a call while you have a call in progress:
1
Enter the phone number or recall the number from the memory
and press the SEND key.
To answer an incoming call while you have a call in progress:
1
Press the SEND key at an incoming call alert.
Note: The Call Waiting network feature normally needs to be
specifically subscribed to with your local service provider,
and may not be available in all service provider networks.
Contact your local service provider for more information.
c1caus.frm Page 43 Thursday, December 19, 1996 12:46 PM