Filter
Top Products
22
Entering Names
1
If in the numeric entry mode, press the ABC key to select the
alpha mode.
The ABC indicator will appear on the display to indicate that
letters can now be entered.
2
Press the key labeled with the letter you want. Press it once to
obtain the first letter, twice (before the cursor appears) to ob-
tain the second and so on. If you miss the letter you want, just
repress the key until the desired character appears.
•
If you want the same letter twice, either select it as above, wait
until the cursor appears and select it again or select the letter
and press the
✱
key and then select it again immediately.
•
If you want a space between the letters, press the # key.
•
If you want a hyphen between the letters, press the 1 key.
•
To correct a mistake, press the CLR key repeatedly to delete
characters one by one or press and hold the CLR key to clear
the whole display. Note: Clearing the whole display automati-
cally restores the numeric mode.
3
To exit the alpha mode, press the ABC key.
You can toggle between a name and number entry by pressing
the ABC key.
Storing Names and Phone Numbers
To use the quick store method:
1
Enter the area code and phone number and name.
2
Press and hold OK for one second.
The message STORED will be displayed confirming that the infor-
mation has been stored in the first empty memory location dis-
played in the upper right corner of the display.
•
If there is no empty location, the message NO SPACE is dis-
played and the information you tried to store will reappear on
the display, and you can store it as described above, or you can
clear the display by pressing and holding the CLR key.
c1caus.frm Page 22 Thursday, December 19, 1996 12:46 PM