Filter
Top Products
36
To select the roaming mode:
1
Press the MENU key and scroll to the menu function SYSTEM
SELECT by using the key and press OK, or press MENU 5
as a shortcut access method.
The phone will display its current roaming mode.
Scroll through the four roaming options by using the key:
HOME TYPE B* The phone uses only its home system(B).
NON-HOME TYPE A* The phone uses only the non-home type
system (A).
HOME AREA The phone uses only its home area and
home system.
BOTH SYSTEMS The phone uses both systems (A and B).
The phone uses its home system when
possible and the non-home type system
when service is not available in its home
system.
* When selected NAM is programmed to system B service provider.
2
To select the displayed setting, press OK.
Note: The home type depends on the programming of the current-
ly selected NAM. The ‘A’ and ‘B’ are reversed when the phone
is registered with a system A service provider. The phone will
automatically display the selected system type (A or B) in
the upper left corner of the display.
CALL TIMERS (MENU 6)
This menu function allows you to check the approximate duration
of the calls you have made and to reset the call duration timers if
so desired. Press the MENU key and scroll to the menu function
CALL TIMERS by using the key and press OK, or press MENU
6 as a shortcut access method.
1
Scroll through the following options by using the key and
confirm your choice by pressing OK:
c1caus.frm Page 36 Thursday, December 19, 1996 12:46 PM